Parker Industrial Hose site map  |  parker.com
Part Number Search
 
 
Hose Selector
Parker/Competitor
Product Search
CrimpSource
Find a Distributor
How to Order
 

Applications

• LP gas/propane
• Bulk loading/unloading, in-plant tank transfer, transport
• Agriculture, commercial and residential heating, construction, general industrial

LP Gas Hose - CSA 8.1 Type I, UL21

Series 7232 is a large diameter, flexible liquefied petroleum gas (LPG)/propane transfer hose for large volume bulk loading/unloading and vibration-resistant onboard vehicle connections. The hose meets all Underwriters Laboratories (UL21) and Canadian (CSA 8.1 Type I) requirements. The construction incorporates multiple braids or plies of textile reinforcement for kink resistance and superior coupling retention. The perforated cover is resistant to mild chemicals, oil and ozone. Series 7232 is available in long lengths and factory-tested assemblies in popular configurations.

NOTES:
Refer to Technical Resources>Critical Applications for safety, handling and use information.

Series 7232 and DOT: LPG hose assemblies installed on on-road vehicles must meet Department of Transportation (DOT) requirements. Factory assemblies (all sizes) are pressure tested, one of the fittings is etched with a unique DOT certification number, and a document incorporating the identical certification number accompanies each assembly. Metal DOT identification bands are also available/attached for an additional charge at customer request. Contact Parker.

Series 7232 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series 7232 may be used for natural gas service, but ONLY under ALL of the following conditions:
• The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
• Series 7232 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier constructions to convey natural gas whenever possible.

Series 7232 and Compressed Natural Gas (CNG): Do not use Series 7232 for CNG engine applications in on-road vehicles, or for high pressure CNG dispenser/transfer applications (typically 2900 psi or greater). In other applications—where CNG is regulated to pressures within the rating of Series 7232—apply the guidelines for natural gas applications stated above. Always review and adhere to all applicable government and industry regulations and standards prior to installing this hose in a CNG or natural gas application.

Series 7232 and Anhydrous Ammonia (NH3):
Do not use Series 7232 with anhydrous ammonia.

Tube: Black nitrile
Reinforcement: Multiple textile braids
Cover: Black chloroprene; perforated wrapped finish
Temp. Range: -40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)
Brand Method: Side one: Embossed Side two: Black text on yellow stripe
Brand Example: Side one (Embossed): PARKER SERIES 7232 CSA 8.1 TYPE I CAUTION - LP GAS HOSE MH6737 C U  ® US ISSUE NO. XXXX 350 PSI MAX WP MADE IN USA (DATE CODE) Side two (Stripe): PARKER LP GAS HOSE
Design Factor: 5:1
Industry Standards: UL21; CSA 8.1 Type I; optional DOT factory hose assembly testing and marking available. Contact Parker.
Vacuum: Not recommended
Compare to: Boston Blackline (LPG); Gates LP350; Thermoid Type 65
Packaging: Cartons, reels

 
 
Part No. ID
(in)
ID
(mm)
Reinf.
Braids
OD
(in)
OD
(mm)
Approx.
Wt. (lbs/ft)
Min.
Bend
Rad (in)
Max.
Rec.
WP (psi)
Perm
Cplg
Rec *
Std
Pack
Qty (ft)
Stock
Status
**
7232-1252 1-1/4 31.8 2 1.815 46.1 0.85 12 350 HY 300 Y
7232-1252100 1-1/4 31.8 2 1.815 46.1 0.85 12 350 HY 100 Y
7232-1503K 1-1/2 38.1 2 2.156 54.8 1.12 14 350 43 150 Y
7232-2003K 2 50.8 3 2.750 69.9 1.90 16 350 7661 150 Y

Table Notes 
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: “Y” indicates stocked item; “N” indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.









WARNINGS!
• Use only with couplings qualified by Parker. Do not use with male swivel couplings or other couplings containing o-rings, which may dry out, crack and fail over time.
• When using this product in a mobile application such as delivery or service vehicles, the inspection procedures detailed in DOT regulation 49CFR 180.416 must be strictly adhered to.