Parker Industrial Hose site map  |  parker.com
Part Number Search
 
 
Hose Selector
Parker/Competitor
Product Search
CrimpSource
Find a Distributor
How to Order
 

Applications

Hot asphalt, glue, tar, oil, wax
Delivery & transport
General industrial

WILDCATTER Hot Oiler Hose

Series 7301 is a heavy duty, high pressure hose designed to circulate hot oil to clean out and increase flow in casings, piping, tanks and tubing. The hose construction incorporates multiple wire braids of reinforcement for crush resistance, durability, kink resistance and a path to conduct a static electrical charge to ground. The cover is resistant to abrasion, heat, oil and weathering.

NOTE:
Refer to Technical Resources>Guides & Tables for fuel compatibility and service conditions.

The Wildcatter trade name indicates the product is designed and manufactured for premium service in oilfield applications. However, Wildcatter products may be used in other industries, markets and applications where the product meets the required performance criteria.

Tube: Black chloroprene
Reinforcement: Multiple wire braids
Cover: Black chloroprene; perforated wrapped finish
Temp. Range: -40F to +275F/300F (-40C to +135C/149C)
Brand Method: Red text on black stripe
Brand Example: PARKER WILDCATTER HOT OILER HOSE (ID) 2250 PSI MAX WP TEMP RATING 275F CONTINUOUS 300F INTERMITTENT
Design Factor: 3:1
Industry Standards: None applicable
Vacuum: Not recommended
Packaging: Coils

 
 
Part No. ID
(in)
ID
(mm)
Reinf.
Plies
OD
(in)
OD
(mm)
Approx.
Wt.
(lbs/ft)
Min.
Bend
Rad (in)
Max.
Rec.
WP (psi)
Perm
Cplg
Rec *
Std
Pack
Qty (ft)
Stock
Status
**
7301-1502 1-1/2 38.1 2 2 50.8 1.59 13 2250 71 50 Y
7301-1502075 1-1/2 38.1 2 2 50.8 1.59 13 2250 71 75 Y

Table Notes 
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.









Warning: Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.