Parker Industrial Hose site map  |  parker.com
Part Number Search
 
 
Hose Selector
Parker/Competitor
Product Search
CrimpSource
Find a Distributor
How to Order
 

Applications

Air, mild chemicals, oil, water; hot asphalt, glue, oil, tar and wax; steam; biodiesel (to B20 in dedicated and non-dedicated service), diesel, ethanol, gasoline
High pressure washdown; cleaning containment vessels and manufacturing equipment; cleaning and heating processing equipment
General industrial, manufacturing and processing plants, refineries

MPW-1000 High Pressure Wire Braid Multipurpose Hose

Series 7204 is an extremely versatile hose designed to handle air, mild chemicals, oil, refined fuels such as biodiesel (to B20 in dedicated and non-dedicated service), diesel, ethanol and gasoline, saturated steam and water. The hose construction incorporates a premium grade tube especially suited for high temperature materials such as hot asphalt, glue, oil, tar and wax to 300F continuous/350F inter mittent (149C/177C). The high tensile wire braid reinforcement provides durability, kink resistance, high pressure capability and superior coupling retention, and the cover is resistant to heat, oil and weathering. Series 7204 is also designed for saturated steam applications at temperatures to 368F (187C) and pressures to 150 psi (10.3 bar). The tube resists popcorning and oil-based detergents and rust inhibitors found in steam systems.
NOTES:
Refer to the table on pages 213-214 for fuel compatibility and service conditions.
Do not use for fuel dispensing or service applications requiring API, NFPA, UL, ULC or any other agency approval or listing.

Tube: Black Nitrile
Reinforcement: One wire braid
Cover: Black chloroprene; perforated wrapped finish
Temp. Range: Steam: -20F to +368F (-29C to +187C) saturated steam to 150 psi max WP
Other: -20F to +300F (-29C to +149C) / 350F (177C) intermittent
Brand Method: Embossed
Brand Example: PARKER SERIES 7204 - MPW XXX PSI MAX WP (DATE CODE) MADE IN USA
Design Factor: 4:1 (10:1 steam @ 150 psi/10.3 bar)
Industry Standards: None applicable
Vacuum: Not recommended
Compare to: Boston Hot Tar Pumping; Gates 319MB Gold Master; Veyance Pyroflex
Packaging: Reels

 
 
Part No. ID
(in)
ID
(mm)
Reinf.
Plies
OD
(in)
OD
(mm)
Approx.
Wt. (lbs/ft)
Min.
Bend
Rad (in)
Max.
Rec.
WP (psi)
Perm
Cplg
Rec *
Std
Pack
Qty (ft)
Stock
Status
**
7204-1001 1 25.4 1 1.5 38.1 0.75 12 1000 43 500 Y
7204-501 1/2 12.7 1 0.906 23 0.34 7 1000 43 500 N
7204-751 3/4 19.1 1 1.187 30.1 0.52 10 1000 43 500 Y

Table Notes 
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.









WARNINGS!
Failure to properly inspect, maintain, test and use steam hose assemblies may result in property damage, personal injury or death. Refer to ARPM publication IP-11-1, Guide for Use, Testing and Inspection of Steam Hose.
Water changes to hot water and phases of steam when subjected to heat and pressure. The greater the pressure, the higher the temperature required to achieve and maintain a steam phase. If steam escapes, dangerous quantities of heat may be released very suddenly. Exposure to hot water, low pressure steam and high pressure steam may cause severe scalding or fatal burns.
Use only hoses designated for steam service for steam applications. Use ONLY Parker recommended hose/coupling combinations for steam applications. Refer to CrimpSource at www.safehose.com.
Prior to use with detergents or rust inhibitors, refer to the chemical guide in this catalog or contact Parker.
Drain steam hose after each use to reduce the possibility of hose popcorning while in service.
Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.