Parker Industrial Hose site map  |  parker.com
Part Number Search
 
 
Hose Selector
Parker/Competitor
Product Search
CrimpSource
Find a Distributor
How to Order
 

Applications

• Hot water, mild chemicals
• Agriculture, construction, general industrial, oil field, shipyards

HURRICANE™ Pressure Washer Hose

Series 7258 is a flexible, high pressure, high temperature pressure washer hose for hot water and mild chemicals. The hose construction incorporates a high tensile wire braid reinforcement that provides durability, kink resistance and superior coupling retention. Both cover colors are resistant to oil and weathering.

NOTE: Do not use for carpet cleaning or steam service.

Tube: Black chloroprene
Reinforcement: One wire braid
Cover: Black (BK), chloroprene, wrapped finish; Blue (BL) chloroprene; perforated wrapped finish
Temp. Range: -40°F to +250°F (-40°C to +121°C)
Brand Method: White ink
Brand Example: PARKER SERIES 7258 HURRICANE™ 3000 PSI MAX WP MADE IN USA (DATE CODE)
Design Factor: 4:1
Industry Standards: None applicable
Vacuum: Not recommended
Compare to: Gates Power Clean
Packaging: Reels

 
 
Part No. ID
(in)
ID
(mm)
Reinf.
Braids
OD
(in)
OD
(mm)
Approx.
Wt. (lbs/ft)
Min.
Bend
Rad (in)
Max.
Rec.
WP (psi)
Perm
Cplg
Rec *
Std
Pack
Qty (ft)
Stock
Status
**
7258-250BK 1/4 6.4 1 0.5 12.7 0.14 1.5 3000 HY, 43 500 Y
7258-250BL 1/4 6.4 1 0.5 12.7 0.14 1.5 3000 43 500 Y
7258-380BK 3/8 9.5 1 0.625 15.7 0.19 2 3000 HY, 43 500 Y
7258-380BL 3/8 9.5 1 0.625 15.7 0.19 2 3000 43 500 Y
7258-501BK 1/2 12.7 1 0.745 18.9 0.23 3 2500 HY, 43 500 N

Table Notes 
Factory Assemblies: Available from stock in popular configurations.
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: “Y” indicates stocked item; “N” indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.









Warning: Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.