Parker Industrial Hose site map  |  parker.com
Part Number Search
 
 
Hose Selector
Parker/Competitor
Product Search
CrimpSource
Find a Distributor
How to Order
 

Applications

• Anhydrous ammonia
• In-plant and tank transfer, transport and delivery; fertilizer dispensing
• Agriculture

Anhydrous Ammonia Hose Stainless Steel Reinforced

Series 7261 is a premium anhydrous ammonia transfer hose. The hose construction incorporates corrosion resistant high tensile stainless steel and nylon braids for superior durability and service life. The perforated cover is resistant to abrasion, mild chemicals and ozone, and the distinctive silver stripe provides color-coded identification.

NOTES:
• Refer to Technical Resources>Critical Applications/Usage for safety, handling and use information.
• Refer to Technical Resources>Guides & Tables to determine compatibility with specific chemicals. Contact Parker for additional chemical compatibility information, and for suitability for non-agricultural/industrial refrigeration applications.
• Do not use with LPG or natural gas.
• Series 7261 is a non-stock, seasonal product available only through Parker Select Anhydrous Ammonia Hose Assembly Fabricators. Contact Parker for a referral.

Tube: Black EPDM
Reinforcement: One or multiple stainless steel braids and one textile braid
Cover: Black EPDM; perforated wrapped finish
Temp. Range: -40°F to +180°F (-40°C to +82°C)
Brand Method: Side 1: Embossed
Side 2: Solid silver stripe
Brand Example: PARKER SERIES 7261 SS ANHYDROUS AMMONIA - (YEAR) REMOVE NO LATER THAN (YEAR +7) - 350 PSI MAX WP ARPM (BATCH CODE) - CAUTION ANHYDROUS AMMONIA USE ONLY - (YEAR) REMOVE NO LATER THAN (YEAR +7)
Design Factor: 5:1
Industry Standards: ARPM IP-14
Vacuum: Not recommended
Compare to: Goodall N2595
Packaging: Coils (bulk hose available only to Parker Select Anhydrous Ammonia Hose Assembly Fabricators)

 
 
Part No. ID
(in)
ID
(mm)
Reinf.
Plies
OD
(in)
OD
(mm)
Approx.
Wt. (lbs/ft)
Min.
Bend
Rad (in)
Max.
Rec.
WP (psi)
Perm
Cplg
Rec *
Std
Pack
Qty (ft)
Stock
Status
**
7261-1001 1 25.4 2 1.5 38.1 0.65 12 350 43, 7661 50 N
7261-1252 1-1/4 31.8 2 1.781 45.2 0.85 16.5 350 43 50 N
7261-1501K 1-1/2 38.1 2 2.03 51.6 1.02 20 350 43 50 N
7261-2002K 2 50.8 3 2.625 66.7 1.61 25 350 7661 50 N

Table Notes 
* Couplings: Refer to CrimpSource® at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: “Y” indicates stocked item; “N” indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
Hose Assemblies: Available only from Parker Select Anhydrous Ammonia Hose Assembly Fabricators.









WARNINGS!
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
• Refer to Technical Resources>Safety for the proper use of this hose.
• For Anhydrous Ammonia use ONLY. Do not use in Liquid Petroleum Gas (LPG)/Propane or Natural Gas applications. Use only with couplings qualified by Parker. Do not use with couplings containing hidden o-rings such as male swivel couplings. For non-agricultural or refrigeration applications, contact Parker.
• Contact with Anhydrous Ammonia (NH3) will burn skin and is especially damaging to the eyes and lungs. This is true for its liquid and gaseous (vapor) state. Many accidents involving NH3 have occurred by using the wrong hose. NH3 hose must be specially compounded and constructed to handle the media. NEVER use a hose that is not designed for NH3 because it may fail very quickly and cause bodily injury or death. It is especially important to ensure that only Anhydrous Ammonia hose is recommended and used for this service. Refer to ARPM Publications IP-14 “Anhydrous Ammonia Hose, Specifications” and IP-11-2 “Anhydrous Ammonia Hose, Manual for Maintenance, Testing and Inspection.”