Parker Industrial Hose
site map  |  parker.com
Part Number Search
 
 
Hose Selector
Parker/Competitor
Product Search
CrimpSource
Find a Distributor
How to Order
 

Applications

• Saturated and superheated steam
• Cleaning containment vessels and manufacturing equipment; cleaning and heating process equipment
• Manufacturing and processing plants, refineries

DRAGON BREATH® Chlorobutyl Compact Steam Hose Non-Skive E-Z Crimp

Series 7286C is a compact, slim profile hose designed for long-lasting steam service—one of the toughest applications for hose, where the hot-cold/wet-dry cycling attacks rubber compounds externally as well as internally. The hose construction incorporates premium, high-performance chlorobutyl in both the tube and the cover, providing extreme heat resistance, durability, performance and service life. The wire braid reinforcement provides crush-resistant durability, kink resistance and a path to conduct a static electrical charge to ground, and the cover resists abrasion, cracking, hardening and ozone. Series 7286C is qualified with Parker non-skive crimp couplings for easy and quick assembly fabrication as well as maintenance-free service.

NOTES:
Refer to Technical Resources>Critical Applications for safety, handling and use information.
Tube: Black chlorobutyl
Reinforcement: Multiple wire braids
Cover: Black chlorobutyl; perforated wrapped finish
Temp. Range: -40°F to +406°F saturated steam/+450°F superheated steam
(-40°C to +208°C saturated steam/+232°C superheated steam)
Brand Method: Embossed
Brand Example: PARKER SERIES 7286C DRAGON BREATH® E-Z CRIMP BUTYL STEAM 250 PSI MAX WP MADE IN USA (DATE CODE)
Design Factor: 20:1
Industry Standards: None applicable
Vacuum: Not recommended
Packaging: Cartons

 
 
Part No. ID
(in)		 ID
(mm)		 Reinf.
Braids		 OD
(in)		 OD
(mm)		 Approx.
Wt. (lbs/ft)		 Min.
Bend
Rad (in)		 Max.
Rec.
WP (psi)		 Perm
Cplg
Rec *		 Std
Pack
Qty (ft)		 Stock
Status
**
7286C-1002 1 25.4 2 1.467 37.3 0.64 12.0 250 CS 50 N
7286C-502 1/2 12.7 2 0.950 24.1 0.37 7.0 250 71 50 N
7286C-752 3/4 19.1 2 1.200 30.5 0.47 9.5 250 CS 50 N

Table Notes 
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: “Y” indicates stocked item; “N” indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.








WARNINGS!
• Failure to properly inspect, maintain, test and use steam hose assemblies may result in property damage, personal injury or death. Refer to ARPM publication IP-11-1, “Guide for Use, Testing and Inspection of Steam Hose.”
• Water changes to hot water and phases of steam when subjected to heat and pressure. The greater the pressure, the higher the temperature required to achieve and maintain a steam phase. If steam escapes, dangerous quantities of heat may be released very suddenly. Exposure to hot water, low pressure steam and high pressure steam may cause severe scalding or fatal burns.
• Use only hoses designated for steam service for steam applications.
• Prior to use with detergents or rust inhibitors, refer to the chemical guide in this catalog or contact Parker.
• Drain steam hose after each use to reduce the possibility of hose popcorning while in service.
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
30242 Lakeland Boulevard  Wickliffe, OH 44092
About  | Contact  |  FAQ  |  Safety
 PHconnect
©2017, Parker Hannifin Corporation