Parker Industrial Hose site map  |
Part Number Search
Hose Selector
Product Search
Find a Distributor
How to Order


• LP gas/propane
• Bulk loading/unloading; in-plant tank transfer

LP Gas Hose Static Wire - ISO 2928-1986 (E)

Series SS106 is a large diameter, heavy duty liquefied petroleum gas (LPG)/propane transfer hose for large volume bulk loading/unloading. The hose construction incorporates multiple plies of textile reinforcement for flexibility and kink resistance, and the perforated cover is resistant to abrasion, oil and ozone. The hose meets ISO 2928-1986 (E) requirements.

• Do not use in applications requiring Underwriters Laboratories (UL) or Canadian Gas Association (CGA) performance or listing.
• Refer to Technical Resources>Critical Applications for safety, handling and use information.

Series SS106 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series SS106 may be used for natural gas service, but ONLY under ALL of the following conditions:
• The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
• Series SS106 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier constructions to convey natural gas whenever possible.

Series SS106 and Compressed Natural Gas (CNG): Do not use Series SS106 for CNG engine applications in on-road vehicles, or for high pressure CNG dispenser/transfer applications (typically 2900 psi or greater). In other applications—where CNG is regulated to pressures within the rating of Series SS106—apply the guidelines for natural gas applications stated above. Always review and adhere to all applicable government and industry regulations and standards prior to installing this hose in a CNG or natural gas application.

Series SS106 and Anhydrous Ammonia (NH3):
Do not use Series SS106 with anhydrous ammonia.

Tube: Black nitrile
Reinforcement: Multiple textile plies with static wire
Cover: Black nitrile; perforated wrapped finish
Temp. Range: -40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)
Brand Method: Embossed
Brand Example: PARKER SERIES SS106 (ID) LPG HOSE ISO 2928-1986 (E) 20 BAR 350 PSI WP
Design Factor: 5:1
Industry Standards: ISO 2928-1986 (E)
Vacuum: Not recommended
Packaging: Coils

Part No. ID
Wt. (lbs/ft)
Wt. (kg/ft)
WP (psi)
Rec *
Qty (ft)
SS106-3000 3 76.2 4 3.74 95.0 2.5 1.15 350 * 100 N
SS106-4000 4 101.6 6 5.00 127.0 4.5 2.03 350 * 100 N

Table Notes 
* Couplings: Refer to CrimpSource at for coupling recommendations and crimp specifications.
** Stock: “Y” indicates stocked item; “N” indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.

WARNING! Use only with couplings qualified by Parker. Do not use with male swivel couplings or other couplings containing o-rings, which may dry out, crack and fail over time.