Parker Industrial Hose site map  |  parker.com
Part Number Search
 
 
Hose Selector
Parker/Competitor
Product Search
CrimpSource
Find a Distributor
How to Order
 

Applications

Low pressure fuel lines on blowers, grinders, mowers, off-road engines, pressure washers, saws
Biodiesel (to B20 in dedicated and non-dedicated service), diesel, ethanol, gasoline
Agricultural equipment, autos, buses, construction equipment, off-road equipment

SUPER-FLEX FL-7 Barrier Fuel Line Hose CARB / SORE; EPA; SAE J30R7 / 30R14T2

Series 389 is a fuel line/vapor emission hose for refined fuels such as biodiesel (to B20 in dedicated and non-dedicated service), diesel, ethanol and gasoline. The hose incorporates a THV barrier to resist permeation, multiple aramid plies of reinforcement for coupling retention, durability and kink resistance, and the cover is resistant to abrasion, oil and weathering. The hose is flexible for easy routing in and around small engines and small engine compartments. Series 389 surpasses all of the California Air Resource Board (CARB)/Small Off-Road Engine (SORE) and Environmental Protection Agency (EPA) stringent permeation requirements of 15g/m2/day. It also meets or exceeds SAE J30R7 and SAE J30R14T2 specifications, and is compatible with Parker SAE J2044 and J2045 Push-to-Connect fittings.

NOTES:
Refer to Technical Resources>Charts for fuel compatibility and service conditions.
Do not use in marine fuel applications.

Tube: Black nitrile and translucent THV barrier
Reinforcement: Multiple aramid plies
Cover: Black CPE, smooth finish
Temp. Range: -40F to + 257 F (-40C to +125C)
Brand Method: White ink
Brand Example: PARKER SERIES 389 SUPER-FLEX FL-7 (ID) SAE J30R7/R14T2 FUEL LINE (x)PKHPLINE389 EPA COMPLIANT 15 g/m2/day CARB Q-08-013 MAX WP 50 PSI USA (DATE CODE)
NOTE: (x) changes every year
Design Factor: 5:1
Industry Standards: CARB 2006 SORE, EPA, SAE J30R7, SAE J30R14T2,
Vacuum: 24
Compare to: Avon Greenbar 700, Gates 4219B
Packaging: Reels

 
 
Part No. ID
(in)
ID
(mm)
Reinf.
Plies
OD
(in)
OD
(mm)
Approx.
Wt. (lbs/ft)
Min.
Bend
Rad (in)
Max.
Rec.
WP (psi)
Perm
Cplg
Rec *
Std
Pack
Qty (ft)
Stock
Status
**
38903 3/16 4.8 2 0.406 10.3 0.06 1.3 50 55 250 Y
38904 1/4 6.4 2 0.500 12.7 0.09 1.5 50 HY 250 Y
38905 5/16 7.9 2 0.562 14.3 0.11 2.0 50 HY 250 Y
38906 3/8 9.8 2 0.625 15.8 0.12 2.5 50 HY 250 Y
38908 1/2 12.7 2 0.781 19.8 0.18 4.0 50 HY 250 Y
38910 5/8 15.9 2 0.938 23.9 0.24 5.0 35 * 250 N
38912 3/4 19.1 2 1.125 28.6 0.35 6.0 35 * 250 N

Table Notes 
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.









WARNING! Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.