• Low pressure fuel lines, vapor emission service
• Biodiesel (to B20 in dedicated and non-dedicated service), diesel, ethanol, gasoline
• Agricultural equipment, autos, buses, construction equipment,
off-road equipment
Fuel Line/Vapor Emission Hose SAE 30R7
Series 395 is a fuel line/vapor emission hose for refined fuels such as biodiesel (to B20 in dedicated and non-dedicated service), diesel, ethanol and gasoline. The hose is flexible for easy routing in and around small engines and small engine compartments, and the cover is resistant to abrasion, oil and weathering.
NOTES: • Refer to Resources>Charts for fuel compatibility and service conditions.
• Do not use in marine fuel applications.
Tube:
Black nitrile
Reinforcement:
Multiple textile plies
Cover:
Black chloroprene; smooth finish
Temp. Range:
-40°F to +257 °F (-40°C to +125°C)
Brand Method:
White ink
Brand Example:
(ID) FUEL/VAPOR LINE SAE 30R7 (DATE CODE)
Design Factor:
5:1
Industry Standards:
SAE 30R7
Vacuum:
24
Compare to:
Thermoid Fueling, Vapor Emission and Crankcase Ventilation SAE 30R7
Packaging:
Coils
Part No.
ID (in)
ID (mm)
Reinf. Plies
OD (in)
OD (mm)
Approx. Wt. (lbs/ft)
Min. Bend Rad (in)
Max. Rec. WP (psi)
Perm Cplg Rec *
Std Pack Qty (ft)
Stock Status **
39550
1/4
6.4
2
0.5
12.7
0.1
2
50
*
250
Y
39551
5/16
7.9
2
0.563
14.3
0.11
3
50
*
250
Y
39552
3/8
9.5
2
0.625
15.9
0.14
3.5
50
*
250
Y
39553
3/16
4.8
2
0.406
10.3
0.07
2
75
*
250
Y
39554
1/2
12.7
2
0.781
19.8
0.17
4
35
*
250
N
Table Notes * Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: “Y” indicates stocked item; “N” indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.
Warning: Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.
Warning: Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to