Parker Industrial Hose site map  |  parker.com
Part Number Search
 
 
Hose Selector
Parker/Competitor
Product Search
CrimpSource
Find a Distributor
How to Order
 

Applications

Slurries, water
Construction, general industrial, surface mines

Lightweight Water Suction Hose

Series SW300 is a large diameter, lightweight suction and discharge hose for slurries and water. The hose construction incorporates a dual wire helix that provides full suction capability and kink resistance. The SBR cover is resistant to abrasion and weathering.

NOTE:
For larger diameter hose, refer to Series EW300.

Tube: Black SBR
Reinforcement: Multiple textile plies with dual wire helix
Cover: Black SBR; wrapped finish
Temp. Range: -40F to +180F (-40C to +82C)
Brand Method: Not branded
Design Factor: 4:1
Industry Standards: None applicable
Vacuum: Full
Compare to: Gates Barracuda; Veyance Plicord Con-Ag Water S&D
Packaging: Coils

 
 
Part No. ID
(in)
ID
(mm)
Reinf.
Plies
OD
(in)
OD
(mm)
Approx.
Wt. (lbs/ft)
Min.
Bend
Rad (in)
Max.
Rec.
WP (psi)
Perm
Cplg
Rec *
Std
Pack
Qty (ft)
Stock
Status
**
SW300-6000 6 152.4 2 6.625 168.3 3.64 30 100 * 100 N
SW300-8000 8 203.2 4 9.188 233.4 11.07 48 100 * 100 N

Table Notes 
* Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: Y indicates stocked item; N indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.









Warning: Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.