Parker Industrial Hose site map  |  parker.com
Part Number Search
 
 
Hose Selector
Parker/Competitor
Product Search
CrimpSource
Find a Distributor
How to Order
 

Applications

• Bobtail Delivery
• Grills & Cookers
• Heaters

LP Gas Hose Factory Assemblies - CSA 8.1 Type I, UL21

Series 7132 is a flexible, lightweight liquefied petroleum gas (LPG)/propane delivery and transfer hose. The hose meets all Underwriters Laboratories (UL21) and Canadian (CSA 8.1 Type I) requirements. The construction incorporates multiple textile plies of reinforcement for flexibility and kink resistance. The perforated cover is resistant to mild chemicals, oil and ozone. Series 7132 is available in long lengths on reels, long cut lengths and factory-tested assemblies from stock in popular configurations.

NOTES:
Refer to Technical Resources>Critical Applications for safety, handling and use information.

Series 7132 and DOT: LPG hose assemblies installed on on-road vehicles must meet Department of Transportation (DOT) requirements. Factory assemblies (3/4" and larger) are pressure tested, one of the fittings is etched with a unique DOT certification number, and a document incorporating the identical certification number accompanies each assembly. Metal DOT identification bands are also available/attached for an additional charge at customer request. Contact Parker.

Series 7132 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series 7132 may be used for natural gas service, but ONLY under ALL of the following conditions:
• The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
• Series 7132 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier constructions to convey natural gas whenever possible.

Series 7132 and Compressed Natural Gas (CNG): Do not use Series 7132 for CNG engine applications in on-road vehicles, or for high pressure CNG dispenser/transfer applications (typically 2900 psi or greater). In other applications—where CNG is regulated to pressures within the rating of Series 7132—apply the guidelines for natural gas applications stated above. Always review and adhere to all applicable government and industry regulations and standards prior to installing this hose in a CNG or natural gas application.

Series 7132 and Anhydrous Ammonia (NH3):
Do not use Series 7132 with anhydrous ammonia.

Tube: Black nitrile
Reinforcement: Multiple textile plies
Cover: Black chloroprene; perforated smooth finish
Temp. Range: -40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C)
Brand Method: Impression
Brand Example: PARKER SERIES 7132 (ID) CSA 8.1 TYPE I CAUTION - LP GAS HOSE MH6737 C U ® US ISSUE NO. XXXXXX 350 PSI MAX WP MADE IN USA (DATE CODE)
Design Factor: 5:1
Industry Standards: UL21; CSA 8.1 Type I; optional DOT factory hose assembly testing and marking also available for sizes smaller than 3/4
Vacuum: Not recommended
Compare to: Eaton Boston Blackline (LPG); Gates LP350; Thermoid Type 75
Packaging: Cartons
Coupling Material: Steel

 
 
Part Number ID
(in)
ID
(mm)
Length
(ft)
Max Rec
WP
(psi)
Coupling
One End
Coupling
Other End
Coupling
Thread
Approx
Wt
(lbs ea)
Std Pack Qty
(ea)
Stock
Status
**
7132HY12MP-12 3/4 19.1 1 350 Male Rigid Male Rigid 3/4 x 3/4 1.3 1 Y
7132HY12MP-120 3/4 19.1 10 350 Male Rigid Male Rigid 3/4 x 3/4 5.9 8 Y
7132HY12MP-1200 3/4 19.1 100 350 Male Rigid Male Rigid 3/4 x 3/4 52.0 1 N
7132HY12MP-144 3/4 19.1 12 350 Male Rigid Male Rigid 3/4 x 3/4 7.0 10 Y
7132HY12MP-1500 3/4 19.1 125 350 Male Rigid Male Rigid 3/4 x 3/4 64.8 1 N
7132HY12MP-180 3/4 19.1 15 350 Male Rigid Male Rigid 3/4 x 3/4 8.5 10 Y
7132HY12MP-1800 3/4 19.1 150 350 Male Rigid Male Rigid 3/4 x 3/4 77.7 1 Y
7132HY12MP-216 3/4 19.1 18 350 Male Rigid Male Rigid 3/4 x 3/4 10.0 1 Y
7132HY12MP-300 3/4 19.1 25 350 Male Rigid Male Rigid 3/4 x 3/4 13.7 1 Y
7132HY12MP-36 3/4 19.1 3 350 Male Rigid Male Rigid 3/4 x 3/4 2.3 8 Y
7132LAR16MP-1200 1 25.4 100 350 Male Rigid Male Rigid 1 x 1 65.1 1 Y
7132LAR16MP-1500 1 25.4 125 350 Male Rigid Male Rigid 1 x 1 81.0 1 Y
7132LAR16MP-1800 1 25.4 150 350 Male Rigid Male Rigid 1 x 1 96.9 1 Y
7132LAR16MP-2100 1 25.4 175 350 Male Rigid Male Rigid 1 x 1 112.8 1 N
7132TY08MP-120 1/2 12.7 10 350 Male Rigid Male Rigid 1/2 x 1/2 3.8 10 Y
7132TY08MP-1200 1/2 12.7 100 350 Male Rigid Male Rigid 1/2 x 1/2 32.8 1 Y
7132TY08MP-144 1/2 12.7 12 350 Male Rigid Male Rigid 1/2 x 1/2 4.5 10 Y
7132TY08MP-180 1/2 12.7 15 350 Male Rigid Male Rigid 1/2 x 1/2 5.4 10 Y
7132TY08MP-216 1/2 12.7 18 350 Male Rigid Male Rigid 1/2 x 1/2 6.4 10 Y
7132TY08MP-240 1/2 12.7 20 350 Male Rigid Male Rigid 1/2 x 1/2 7.0 10 Y
7132TY08MP-300 1/2 12.7 25 350 Male Rigid Male Rigid 1/2 x 1/2 8.6 10 Y
7132TY08MP-600 1/2 12.7 50 350 Male Rigid Male Rigid 1/2 x 1/2 16.7 10 Y
7132TY08MP-72 1/2 12.7 6 350 Male Rigid Male Rigid 1/2 x 1/2 2.5 1 Y
7132TY08MP-96 1/2 12.7 8 350 Male Rigid Male Rigid 1/2 x 1/2 3.2 10 Y

Table Notes 
* Stock: “Y” indicates stocked item; “N” indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.








WARNINGS!
• Use only with couplings qualified by Parker. Do not use with male swivel couplings or other couplings containing o-rings, which may dry out, crack and fail over time.
• When using this product in a mobile application such as delivery or service vehicles, the inspection procedures detailed in DOT regulation 49CFR 180.416 must be strictly adhered to.